# 11 multiple chioce questions in applied science

1. what is the input to a process control system?

### Save your time - order a paper!

Get your paper written from scratch within the tight deadline. Our service is a reliable solution to all your troubles. Place an order on any task and we will take care of it. You won’t have to worry about the quality and deadlines

Order Paper Now

(1) Set Point

(2) Error voltage

(4) none of the above

2. what is the input to a servo control loop?

(1) Set Point

(2) Error Voltage

(4) none of the above

3. What is the slope of a gain block?

(4) none of the above

4. What is the slope of a first-order derivative block?

(4) none of the above

5. . What is the slope of a first-order integral block?

(4) none of the above

6. An element has a transfer function of (1 + 5x)2. What is the critical frequency?

7. A Bode gain plot for an element follows a horizontal 40dB until w = 3 rad/sec where it decreased by -40dB/decade. What is the transfer function for this element?

(1) 40/(1+3s)2

(2) 100/(1+0.33s)2

(3) 40/(1+0.338)2

(4) 100/(1+0.33s)

8. A negative-feedback system has a phase shift of +1800 and a gain of +10dB at 1 rad/sec, and a phase shift of +1600 and a gain of 0dB at 0.2 rad/sec. Is the system stable?

(1) yes

(2) no

9.  A negative-feedback system has a phase shift of -1800 and a gain of -10 dB at 1 rad/sec. What is the gain margin?

(1) 0dB

(2)-10 dB

(3) 20 dB

(4) 10dB

10. Is the system in Question 9 stable if the overall phase shift is +1300 when the overall gain is 0 dB?

(1) yes

(2) no

11. A negative-feedback system has a gain of 0 dB and a phase shift of -1500 at 1 rad/sec. What is the phase margin?

(1) 1800

(2) 300

(3) 1500

(4) none of the above

Applied Sciences homework help